Acumen AiP-Q4U - Manual (Page 40)

AiP-N series 16CH/9CH/4CH Manual
39
1.1-3 Camera source
To setup a camera channel, you can select IP cam, demo video or no IP connection from this setting
1.1-4 AiP camera address
Once the source is set to an AiP camera, you can enter the IP address of the AiP camera for that specific
channel. To manually set the IP address, press Enter to enable editing via the virtual keyboard. You can
also use WS-Discovery for automatic IP address setup.
1.1-5 AiP camera HTTP port
By default, the NVR AiP camera ‘HTTP’ port is set to 80. This can be changed if required.
1.1-6 Video RTSP port
By default, the NVR AiP camera ‘RTSP’ port is set to 554. This can be changed if required.
1.1-7 AiP camera setup