Acumen AiP-Q4U - Manual (Page 71)

AiP-N series 16CH/9CH/4CH Manual
70
Appendix H
Troubleshooting & FAQ
Question: Should I use a gigabit network switch or a 10/100 MPBS network switch for connecting to the Aid
series?
Answer: It is highly recommended to use a gigabit RJ-45 port for connecting to the Aid series. You can still
use 10/100 MBPS ports from a switch for connecting AiP cameras.
Question: Should I use RTP/UDP protocol for connecting AiP cameras to the Aid series?
Answer: In LAN environments please use RTP/UDP protocol (default setting) for connecting AiP cameras
to the Aid series. It is not recommend that you connect AiP cameras via the Internet due to
bandwidth issues. If connecting AiP cameras via the Internet is essential, please use RTP/HTTP
protocol.