Acumen AiP-Q4U - Manual (Page 55)

AiP-N series 16CH/9CH/4CH Manual
54
1. Plug in a portable USB disk at the NVR ’s USB port
2. Press Enter to start firmware update
3. After the transfer has finished, remove the USB device and reboot the NVR.
4. Ensure that the firmware is located in the firmware directory of the USB disk
Export setup
The export setup feature allows a user to export internal configuration into a system file on the USB flash
disk’s firmware directory. The file can later be imported to other machines. The imported machine’s internal
configuration gets updated based on the original NVR’s configuration. To perform Export Setup, select
‘Export Setup’ and press Enter.
Import setup
To perform Import Setup feature, select ‘Import Setup’ and press Enter.
The configuration of the NVR is updated based on the system file
Firmware and kernel version
Version menu item indicates the current version number of the NVR
1.6-7 Language
The NVR provides multi-language OSD support. Users can change the preferred language to operate the
NVR.
Press Left or Right to change the language setting
1.6-8 Audio volume
To turn on or off live audio volume monitoring, set Live Audio option.
1.6-9 Health check
The NVR can perform a system check on the following areas:

Temp Monitor

NVR internal temperature
indicator

FAN Monitor

Fan failure indicator

HDD Write Speed

HDD writing speed indictor

HDD Read Speed

HDD reading speed indictor