Acumen AiP-Q4U - Manual (Page 58)

AiP-N series 16CH/9CH/4CH Manual
57
Iris and auto iris
Adjust these settings as required
Focus and auto focus
Adjust these settings as required
Save presets
Once the above parameters are entered, the preset can be saved.
Clear all presets
To clear all the preset points of a PTZ camera, select ‘Clear All Presets’ and press Enter key on the front
panel or remote control.
Direct keyboard access
Direct keyboard Access mode allows RS-485 protocol to be directly transmitted to the RS-485 PTZ device
The NVR no longer handles the conversion of the RS-485 protocol
This enables the user to access the PTZ menus using the connected keyboard