ACU-RITE Micro-Line T - Manual (Page 12)

MICRO-LINE Reference Manual 9
SETUP
• Move to the “Count Direction” display in the Setup mode. (Press
SETUP and then the ENTER key until “Ct dir” appears).
• Press the appropriate axis key ( X or Z ) t o change the count direction.
• After you complete setting your count direction, press ENTER to con-
tinue with setup or press ENTER then SETUP to return to the normal
DRO display.
To change the count direction:
Count Direction
Use the count direction setting to define the positive counting direction
for each scale. The direction will be displayed as a “1” or a “2” (the
numbers are not assigned to a particular direction). You only need to
change the count direction if the scale is counting in the negative
direction during a positive move, or vice versa.
Refer to Conventions (pg. 31) for more guidelines.
MLTmanual.QXD 2/12/02 4:10 PM Page 22