ACU-RITE Micro-Line T - Manual (Page 25)

MICRO-LINE Reference Manual 22
TROUBLESHOOTING
Keys not
working
properly
Error
messages (E2-
E56) appear Causes vary
Invalid keypress
Symptom
Recommended
Corrective Action
Probable Cause
Turn the system “off”
and then “on” again,
using the switch on the
back of the readout.
If an error (besides E1)
is still detected when the
system is powered up,
contact your
MICRO-
LINE distributor for
repair/replacement
procedures. Refer to pgs.
25 - 26 for a list of error
messages.
Dashes
appear on
screen
(cont’d)
Move the axis toward
the “0” position. As the
scale counts down, the
display will show the
correct position.
Display overflow
Turn the system “off” and
then “on” again, using the
switch on the back of the
readout. If an error (besides
E1) is detected when the
system is powered up, con-
tact your
MICRO-LINE
distributor for
repair/replacement
procedures. Refer to pg. 25-
26 for a list of error mes-
sages.
Error
message (E1)
appears Power loss occurred
This is a normal mes-
sage at power up. If the
message appears at any
other time during opera-
tion, a problem may
have occurred. Refer to
pg. 25 for details.
MLTmanual.QXD 2/12/02 4:10 PM Page 41