ACU-RITE Micro-Line T - Manual (Page 13)

MICRO-LINE Reference Manual
SETUP
10
International Units Only
Input 3 ON/OFF
This parameter allows you to activate the third input. When this input
is enabled, Inputs 2 and 3 will be coupled on the Z-axis (both scales
will count on the Z-axis).
When Input 3 is enabled, additional parameters will need to be setup.
Refer to the procedures on pages 7-9 for setting up the Linear Error
Compensation and Count Direction Setup functions.
MLTmanual.QXD 2/12/02 4:10 PM Page 23