Bosch AKE 30 LI - Manual (Page 23)

English | 23
Bosch Power Tools F 016 L70 758 | (4.10.11)
Product Description and
Specifications
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended for sawing wood
such as wooden beams, planks, branches,
tree trunks, etc., and for sawing of trees. Cuts
can be sawed with or across the grain.
This power tool is not suitable for sawing min-
eral materials.
Delivery Scope
Carefully remove the power tool from its
packaging and check if the following parts are
complete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
– Oil Sachet
– Operating instructions
Battery and charger are included in certain ex-
ecutions.
When parts are missing or damaged, please
contact your dealer.
Product Features
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 Rear handle
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil filler cap
5 Front handle
6 Activation lever for kickback brake (hand
guard)
7 Oil level gauge
8 Gripping teeth
9 Chain guard
10 Chain bar
11 Saw chain
12 Locking knob
13 Cover
14 Ventilation slots – outlet
15 Chain tensioning knob
16 Serial number
17 Battery
18 Battery unlocking button
19 Button for charge-control indicator
20 Battery charge-control indicator
21 Temperature control indicator
22 Charging compartment
23 Battery charger
24 Red LED indicator on the battery charger
25 Green LED indicator on the battery charg-
er
26 Power plug **
27 Symbol for rotation and cutting direction
28 Drive sprocket
29 Fastening bolt
30 Chain tensioning peg
31 Oil outlet
32 Guide fin for chain bar
33 Chain catch bolt
34 Ventilation slots – inlet
** country specific
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Cordless chain saw AKE 30 LI
Article number 3 600 H37 1..
Chain speed (no-load) m/s 8
Chain bar length cm 30
Toolless chain tensioning (SDS) z
Kickback brake z
Chain type 3/8" – 90
Drive link thickness mm 1.1 (0.043")
Amount of drive links 45
Oil reservoir capacity ml 120
Automatic chain oiler z
Metal gripping teeth z
Weight according to EPTA-Procedure 01/2003 kg 5.2
Serial number See serial number 16 (type plate) on the
power tool
Please observe the article number on the type plate of your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-1275-003.book Page 23 Tuesday, October 4, 2011 9:21 AM