SUUNTO Cobra - Manual (Page 33)

31
3.5. DIVING IN GAUGE MODE
If set to Gauge mode, the dive computer can be used
for diving with technical diving mixed gases. If you are
trained for technical diving and you plan to use Gauge
mode on a regular basis, it may be preferable to set the
instrument permanently to its Gauge mode (see section
4.3. “Set Modes”).
If set to Gauge mode the text GAUGE is shown after
activation (Fig. 3.4.).
In the Gauge mode the present depth, maximum depth,
dive time, cylinder pressure, remaining air time and
ascent rate indicator are displayed during the dive (Fig.
3.27.). In addition, temperature and current time are
shown in the alternative display.
NOTE! If you dive with the Gauge mode, it is not
possible to change between the modes within 48
hours.
Fig. 3.27. Diving in Gauge
mode.
m
MAX
DIVE TIME bar
AIR TIME