Set modes [3 set, Dive parameter settings [1 set dive – SUUNTO Cobra User Manual

Page 51

Advertising
background image

49

4.3. SET MODES [3 SET]

The Set Modes (Fig. 4.22.) are divided into three
submodes for setting the dive-related parameters, time-
related parameters and your personal preferences.

4.3.1. DIVE PARAMETER SETTINGS [1
SET DIVE]

To enter the Dive Parameter Setting Mode select MODE-
3 SET- 1 SET DIVE. The Dive Parameter Setting mode
has two to four options depending on the dive computer
mode. In Gauge mode there are two options, in Air mode
three options and in Nitrox mode four options.

4.3.1.1. ALTITUDE ADJUSTMENT AND
PERSONAL ADJUSTMENT SETTINGS
[1 ADJ MODE]

The current Altitude and Personal Adjustment modes are
shown when diving and at the surface. If the mode does
not match the altitude or personal conditions (see section
3.8. “High Altitude Dives and Personal Adjustment”), it
is imperative that you enter the correct selection before
diving. Use the Altitude Adjustment to select the correct
altitude mode. Use the Personal Adjustment to add an
extra level of conservatism.

To enter the Altitude Adjustment and Personal
Adjustment Setting mode, select MODE- 3 SET- 1
SET DIVE- 1 AdJ MODE. Now you are able to select
from the three altitude modes (Fig. 4.23.) and the three
personal modes (Fig. 4.24.).

Fig. 4.22. Setting Options. [3
SET].

Fig. 4.24. Setting Personal
adjustment. Press scroll buttons
to change personal mode.

Fig. 4.23. Setting Altitude
adjustment. Press scroll buttons
to change altitude mode.

QUIT

OPTIONS

OK

OK

Advertising