SUUNTO Cobra - Manual (Page 48)

46
The following data is transferred to the PC:
• depth profi le of the dive
• dive time
• preceding surface interval time
• dive number
• Altitude and Personal adjustment settings
• oxygen percentage setting and maximum OLF (in Nitrox mode)
• tissue calculation data
• temperature at the beginning of the dive, maximum depth and end of the
dive
• dive entry time (year, month, day and time)
• additional dive information (e.g. SLOW and Mandatory Safety Stop
violations, Diver Attention Symbol, Bookmark, Surfaced Mark,
Decompression Stop Mark, Ceiling Error Mark)
• dive computer serial number
• personal 30 character information
• cylinder pressure at the beginning and at the end of the dive (i.e. pressure
drop
∆P during dive)
• surface air consumption.
Using the PC software, you are able to enter setup options such as:
• change the sample rate for profi le records/logbook from the default 20
second interval to 10, 30 or 60 seconds
• input a personal, 30 character fi eld into the Cobra (i.e. your name)
• reset the Dive History’s maximum depth to zero.
It is also possible to manually add comments and other personal information to
the PC based dive data fi les. The PC-Interface package comes complete with the
interface unit, the software and an installation guide.
To enter the Data Transfer mode select MODE- 1 MEMORY- 3 TR - PC (Fig.
4.15.).
NOTE! While in the Data Transfer mode, the connector/water contacts are
used only for the data transfer. The Dive Mode IS NOT automatically activated
if the contacts are submerged.
After you have fi nished the data transfer, press the SMART (Quit) to exit Data
Transfer mode. If a button is not pressed or no data is transferred within 5 minutes,
the instrument beeps and returns to the timekeeping display automatically.