SUUNTO Cobra - Manual (Page 46)

44
Page III (Fig. 4.9.)
• dive number in the dive series
• average depth
• surface interval time before the dive
•
∆P describing Cylinder pressure drop during the dive.
Page IV (Fig. 4.10.)
• dive number in the dive series
• the profi le of the dive, automatic scrolling during which:
• logbook symbol blinks when the user has pressed the PLAN button for
Bookmark
• blinking SLOW label when registered
• blinking ASC TIME label when the dive became a decompression dive.
Press the SMART (Select) button once to change the scroll buttons to scroll the
different dives forward and backward (Fig. 4.11.). Press the SMART (>Select)
button again to change function of the scroll buttons back to scroll the different
pages of the selected dive. When searching the dives, only the page 1 is shown. The
END text is displayed between the oldest and the most recent dive (Fig. 4.12.).
The memory will retain approximately the last 36 hours of dive time. After that,
when new dives are added, the oldest dives are deleted. The contents of the memory
will remain when the battery is changed (assuming that the replacement has been
done according to the instructions).
DIVE PROFILE MEMORY [PROF]
The scrolling of the profi le will start automatically when the Logbook page IV
(PROF) is entered.
With the default setting, the dive profi le is recorded and displayed in 20-second
increments with each display being shown for about three seconds. The depths
shown are the maximum values of each interval.
Pressing any button stops the scrolling of the profi le.
NOTE! Several repetitive dives are considered to belong to the same repetitive
dive series if the no-fl ying time has not ended. See “Dive Numbering” in section
3.6.2. for further information.