Dive numbering – SUUNTO Cobra User Manual

Page 35

Advertising
background image

33

If set to Nitrox mode, the following information will
also be shown:

the oxygen percentage labeled with O

2

% is

shown on the left side of the center window

the current oxygen toxicity exposure shown

with an Oxygen Limit Fraction (OLF) bar
graph along the left side of the display.

3.6.2. DIVE NUMBERING

Several repetitive dives are considered to belong to the
same repetitive dive series when the dive computer has
not counted the no-fl ying time to zero. Within each
series, the dives are given individual numbers. The
fi rst dive of the series will be numbered as DIVE 1, the
second as DIVE 2, the third as DIVE 3, etc.

If you start a new dive with less than 5 minutes of
surface interval time, the dive computer interprets this
as a continuation of the previous dive and the dives are
considered to be the same. The diving display will return,
the dive number will remain unchanged, and the dive
time will begin where it left off. After 5 minutes on the
surface, subsequent dives are, by defi nition, repetitive.
The dive counter displayed in the Planning Mode will
increment to the next higher number if another dive is
made.

Fig. 3.30. Surface interval,
no-fl ying time. Pressing TIME
button twice will show no-fl ying
time, indicated by an airplane
symbol.

Fig. 3.31. Surface Mode after
a violated decompression dive.
Er symbol indicates that you
have violated the ceiling for
more than three minutes. You
must not dive again for at least
48 hours.

Diver Attention Symbol

Violated Decompression
Ceiling

Do Not Fly Symbol

MAX

°C

TIME

NO

m

MAX

°C

TIME

DIVE

m

NO

NO

NO

Advertising