AASTRA 7434ip User Guide EN - Manual (Page 38)

6/1553-DBC 434 01 Uen D 2012-02-22 38
S TARTING THE P HONE
To power up and start the phone again:
• Press .
It takes 1-2 minutes before the phone has started and you get the
log on menu.
• If your extension number does not have an associated PIN code,
the telephone registers to the PBX automatically.
• If your extension number has an associated PIN code, you need to
enter your PIN code.
The reason why you have to enter your PIN code is that otherwise
anybody could power up the telephone and make calls without your
knowledge.
3.6 Restarting the Phone
If your phone does not work properly, you can restart it and restore the
default headset and handset volume settings.
To restore the default settings in the phone, do the following.
1. Press and hold .
2. Select Restart the Phone, and press Select.
A confirmation message is displayed.
3. Press Yes to confirm and restart the phone.
3.7 Updating the Phone Software
When new software is available, you are notified of this via a message
in the phone display.
You have 60 seconds to decide if you want to update the software to the
latest version.
• Select No to skip the update and keep the current software version.
• Select Yes to start downloading the software update from the soft-
ware server. The update process takes approximately 60 seconds
to complete, and the progress is displayed on screen.
– When the update is successful, the phone reboots, and it is
then ready to use, or ready for logon, see 3.2 User Type
Modes on page 35.