Spicer Tandem Drive Axle Dual Range & Double Planetary 34,000-45,000 lbs - Manual (Page 46)

Differential Carrier Overhaul
(Forward and Rear Axles)
Disassemble Drive Pinion (Cont'd)
4.
Remove and retain
bearing spacer from pinion.
5. Remove pilot bearing and inner bearing cone from pinion, using a
split-type puller. Use two procedure steps-to remove each bearing (see
photos above).
First, mount puller vertically to Second, mount puller horizontally
split the bearing.
This action will force
bearing off pinion.
The same procedure
inner bearing cone.
to press pinion out of bearing.
puller halves under bearing and start moving
can be used to remove pilot bearing and pinion
46