Spicer Tandem Drive Axles Service Manual D170, D190, and D590 Series - Manual (Page 19)

15
Power Divider
Pump Disassembly
For output side gear and/or pump replacement, follow the
procedure below.
1. Remove the output side gear bearing cone, if
required.
2. Remove pump locking dowel pin from the hole in the
output side gear hub.
3. Remove pump from the output side gear.
4. Remove the output side gear bearing cup from the
carrier with the proper bearing puller tool.
1 - Press
2 - Press Tool
1
2
Power Divider