TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 112)

Section 7 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
7-2
Functionality
Accessing Printer
Features
Entering the
Administrator
Password
The control panel button sequence required
to select a printer feature is identical for the
2300, 4200, and 4300 printer models. To
differentiate between a Hewlett-Packard
and a TROY printer feature, all TROY
printer features will display the word
TROY
at the top of each main menu.
T O ACCESS PRINTER FEATURES (4200 OR 4300 S ERIES P RINTERS ):
1. Press the W button until the desired menu selection is displayed, and then press the  button. If additional
second-level menu items appear, press the W button to select the desired option, and then press the  button.
2. Press the Up/Down button until the desired value is displayed.
3. Press the  button to save the desired value. An asterisk will be displayed next to the selected value.
4. Press the Pause/Resume button to place the printer back on line.
A valid administrator password must be entered at the printer control panel before access is allowed to any of the
TROY security features and settings. If an administrator password has not been previously set, then the default
password is blank (no password).
T O ENTER THE ADMINISTRATOR PASSWORD (4200 AND 4300 S ERIES P RINTERS ):
1. Press the W button to select TROY MENUS
, and then press the  button.
2. Press the W button to select SECURITY MENU
, and then press the  button.
3. Ensure ACTION is highlighted, and then press the  button.
4. Press the W button to select LOG IN , and then press the  button.
5. Press the W button to select USER ID , and then press the  button.
6. Press the W button to select the letter
A
, and then press the  button. Repeat this process until you have
entered the word
ADMIN
. Press the  button three more times to continue.
7. Press the W button to select PASSWORD , and then press the  button.