TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide User Manual
Page 119
Section 7
Using the Printer Control Panel
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
7-9
Using the
Exact
Positioning
Technology
(cont.)
T
O ADJUST THE POSITION OF THE PAGE IMAGE
:
1. If not already logged into the printer control panel, enter a valid administrator password (
see page 7-2
).
2. Press
the
W button to select
TROY MENUS
, and then press the button.
3. Press
the
W button to select
SETTINGS MENU
, and then press the button.
4. Press the W button to select the desired adjustment parameter (
PAGE ADJUST X DECIPOINTS or PAGE ADJUST Y
DECIPOINTS
), and then press the button.
5. Enter the desired decipoint offset value (-720 to +720) to reposition the page image (X=horizontal and
Y=vertical), and then press the button to save each decipoint value. Each decipoint is equal to 1/720th of
an inch. Repeat this step for each parameter you wish to change.
6. Print a test page to evaluate the MICR line position adjustment. Repeat the adjustment as necessary. Use the
TROY MICR Document Template to verify all MICR line adjustments.