TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 87)

Section 5 Installing the TROY Support Files
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
5-1
Introduction
STEP 1:
Install the HP
PCL 5e
Printer Driver
for Windows
™
Your TROY Security Printing Solution offers value-
added functionality and the flexibility to integrate
smoothly with your check-printing system. Use the
TROY Security Printing Solutions CD to install the
necessary Hewlett-Packard LaserJet printer drivers and
support files. To ensure successful software
installation, perform the following steps in sequential
order. The documentation and installation files
contained on the TROY Security Printing Solutions
CD will be needed in the event that your TROY
Security Printer is reinstalled in a new location or after
service has been performed.
NOTE: Use only the TROY Security Printing Solutions
CD to install the Hewlett-Packard PCL 5e printer driver
designated for your TROY Security Printing Solution.
Do NOT use the Hewlett-Packard CD to install the printer
software for this installation process. In some cases,
certain HP PCL 5e printer drivers do not support TROY
features; therefore, the printer driver you are instructed
to install may not correspond to your printer model.
1. Close all applications before installing the HP PCL 5e printer driver.
2. Insert the TROY Security Printing Solutions CD into the CD-ROM drive of your
computer.
3. Before beginning the installation process, you will need to know the operating
system you are using on your computer. If you already know the operating
system you are using, proceed to step #4. If you are not sure, right-click on My
Computer (located on the Windows desktop), and then left-click on Properties to
view the type of operating system installed on your computer.
4. From the Start menu, click on Settings, and then click on Printers.
5. Double-click on Add Printer, click on Next, choose Local Printer, and then click
on Next. If you are using Windows 2000/XP, skip down to Step 11, and then
proceed with Steps 6 through 10.