TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 60)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
4-15
Selecting Data
Capture Fonts for
Audit Reports
and TROYmark
™
To discourage fraudulent alteration of your printed checks, a user-defined background image (TROYmark
™
) can
be generated using specified information from the check (i.e., check date, convenience amount, payee name,
etc.). By capturing one or more of the check fields for use in the TROYmark
™ , the resulting background image
will be specific to each check, adding to the security of the printed document. Check data can also be captured
for use in the TROY audit report, which can include the check date, payee name, convenience amount, and up to
three additional user-defined check fields.
The special TROY metrics fonts used to generate the desired check information for the background image and/or
audit report must be specified for each desired check field in order to be captured. Once the TROYmark
™ and/or
audit reporting feature is enabled in the TROY Port Monitor (refer to Section 6 – Using the TROY Port Monitor ),
the selected features will remain in effect for the duration of the print job. When the print job has finished, these
features will automatically be disabled.