TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 78)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
4-33
Identifying Print
Defects Continuous streaks and voids that may
appear on the TROY MICR Quality
Document are usually the result of a
low toner condition. A scratch or
other contamination on the surface of
the optical drum inside the toner
cartridge can also cause streaking and
other print quality defects.
To ensure optimum MICR print
quality, always use a genuine TROY
MICR toner cartridge with your
TROY Security Printing Solution.
Always replace the TROY MICR
toner cartridge with a new TROY
MICR toner cartridge when the
TONER
LOW message appears on the printer
control panel. MICR documents
printed after a low toner condition
may not meet MICR specifications
and cause your printed checks to be
rejected, thereby incurring significant
manual processing fees to you by your
bank.
NOTE: If your TROY Security Printing
Solution develops a noticeable print
quality defect that cannot be corrected
by replacing the MICR toner cartridge,
the MICR Quality Document can be
sent to TROY for evaluation. Do not
continue to print MICR documents if
print defects are present.