Veris Technologies pH Manager - Operating Instructions - Manual (Page 41)

Pub.# OM17-MSP-pH
5-1
SECTION 5
Maintenance and Service
Clean-up
—ISE storage, wash
If you are going to interrupt your pH mapping for 30 minutes or longer, clean off the electrodes and
the electrode holder with the wash wand, and install the soaker solution container on the electrode
holder. Replace soaker solution (Veris part #23395) weekly, or more frequently if it is diluted or
dirty.
Figures 23a and 23b
pH Electrodes
Figure 24
electrode body
reference junctions
electrode face
antimony measurement tip