VEGA VEGAMET 515 - Manual (Page 29)

VEGAMET 515 29
like input 4
Input no. 1: VBUS input (measured value)
Input no. 4: Correction input
Input
no. 4
Input
from
local
Met
Chan-
nel no.
K1
Input
undef-
ined
6.7 Configuration of inputs
Configuration
Confi-
gura-
tion
Config
inputs
Input
no. 1
Input
from
local
Met
Chan-
nel
no.
S1
Sensor
charac-
terist-
ics
Min.
meas.
range
0,00
Max.
meas.
range
1,00
Min.
sensor
value
4,000
Max.
sensor
value
20,000
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
MET02
MET03
MET04
….
Input
undef-
ined
Input1
Input2
Input3
Input local MET:
Here you can enquire another VEGAMET
(e.g. Met 04) and hence determine that the
input signal is not accepted from a directly
connected sensor, but from a VEGAMET
connected via DISBUS (e.g. VEGAMET 515).
The enquired VEGAMET number corre-
sponds to the DISBUS address of the instru-
ment (see chapter 4.1).
If another VEGAMET has been chosen, the
menu item "Input undefined" appears in which
you can set the input number of the other
VEGAMET (see example "Weir control“).
Enter under " Sensor characteristics“ the
values stated in the test certificate (of hydro-
static pressure transmitters). These settings
are important if you carry out a differential
measurement with your VEGAMET.
The menu items "Min. meas. range“ and
"Max. meas. range“ are only visible with
hydrostatic pressure transmitters.
Input
no. 2 Input
no. 5
like input 1