VEGA VEGAMET 515 - Manual (Page 59)

VEGAMET 515 59
Error code Meaning
Diagnosis
E061 Span of the voltage output values too small. The values for the voltage output
are too close together or are identical. Please check the adjustment of the
voltage output.
E063 Wrong sensor characteristics values. Please check the sensor characteristics
values
E102 A reset of the configuration was carried out on this VEGAMET via the key-
board.
E110 Switching hysteresis too small. The switching points are too close together or
are identical.
E111 Relay switching points reversed. The relay switching points are reversed in
relation to the selected relay mode.