VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART four-wire - Manual (Page 39)

Menu item Reset value
M in. adjustment 30 m(d) (VEGAPULS 61, 63, 65, 67)
35 m(d) (VEGAPULS 62, 66)
70 m(d) (VEGAPULS 68)
M edium L iquid
V essel form not known
D amping 0 s
L inearisation linear
S ensor-TAG S ensor
D isplayed value D istance
E xtended settings N one
C urrent output - characteristics 4 … 20 mA
C urrent output - max. current 20 mA
C urrent output - min. current 4 mA
C urrent output - failure < 3.6 mA
U nit of measurement m(d)
T he values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Menu item Reset value
L ighting no reset
L anguage no reset
SIL no reset
HART mode no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values. 2)
Pointer
T
he min. and max. distance values are reset to the actual value.
A dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAPULS 62 • 4 … 20 mA/HART four-wire 39
6 S et up with the indicating and adjustment module PLICSCOM
28440
-EN
-090305