VEGA VEGABAR 65 Foundation Fieldbus User Manual
Page 28
Advertising
l
Indication of the instrument type, the firmware as well as the
sensor TAGs (sensor designation)
l
Status byte goes briefly to fault value
Then the current measured value will be displayed and the
corresponding digital output signal will be outputted to the cable.
2)
2)
The values correspond to the actual measured level as well as to the set-
tings already carried out, e.g. default setting.
28
VEGABAR
65 • Foundation Fieldbus
5 Connect to power supply
28260
-EN
-090522
Advertising