VEGA VEGABAR 64 4 … 20 mA_HART - Manual (Page 41)

Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values. 6)
Pointer
T
he min. and max. temperature or pressure values are each reset to
the actual value.
A dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
6) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGABAR 64 • 4 … 20 mA/HART 41
6 S et up with the indicating and adjustment module PLICSCOM
27525
-
EN
-081209