VEGA VEGAVIB 62 Cable shortening set - Manual (Page 10)

14 9 19
Fig. 4: Unwind the vibrating element
9 Cable
14 Pressure screw
19 Upper part of the oscillator
9 Loosen the upper part of the oscillator (19) with pipe tongs
and unscrew it. Both threaded connections are secured
with soluble locking paint.
Make sure that the cable (9) does not turn.
A B
Fig. 5: Pull apart the vibrating element carefully - cut the wires
A Upper part of the oscillator
B Lower part of the oscillator
10 Stretch out the two parts (A and B) carefully.
Cut the wires directly on the crimping with side cutters (see
arrows).
9 10 19
Fig. 6: Pull the cable out of the upper part of the oscillator
9 Cable
10 Perforated disc
19 Upper part of the oscillator
10 VEGAVIB 62 • Cable shortening set
Mounting
30097
-EN
-080310