VEGA VEGAVIB 62 Cable shortening set - Manual (Page 5)

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l
Cable shortening set
l
Documentation
- this operating instructions manual
3.2 Principle of operation
The cable shortening set is a set of parts used to shorten a
VEGAVIB 62 in cable version PUR (temperature range
-40° … +150° C).
The cable shortening set can be used, e.g., when the sensor
has to be guided through a narrow tube.
The cable shortening set must not be used if the sensor is
deployed for solids detection in water.
The cable of the sensor consists of a suspension cable, the
electrical cables and an outer insulation.
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
Transport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
The delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
Scope of delivery
Area of application
Functional principle
Packaging
Transport
Transport inspection
VEGAVIB 62 • Cable shortening set 5
Product description
30097
-EN
-080310