VEGA VEGAVIB 62 Cable shortening set - Manual (Page 16)

18 17 14 15 16 19
Fig. 15: Cable sealing
14 Pressure screw
15 Pressure ring
16 Rubber wrapping
17 Washer
18 Rubber rings
19 Upper part of the oscillator
30 Provide the pressure screw (14) with screw retention and
screw it into the upper part of the oscillator (19).
31 Tighten the pressure screw (14) with the fork wrench
SW 24 (approx. 6 Nm/4.4 lbf ft).
32 Check the length of the sensor.
33 Mount the sensor.
34 Connect the sensor according to the operating instructions
of the sensor.
35 Check the correct switching function of the sensor.
16 VEGAVIB 62 • Cable shortening set
Mounting
30097
-EN
-080310