VEGA VEGABAR 63 4 … 20 mA_HART - Manual (Page 59)

Process conditions
T he specifications to the pressure stage and the product temperature are used as an overview.
T he specifications of the type label are applicable.
P roduct temperature, depending on the seal 14)
-
FKM (VP2/A) -20 … +100 °C (-4 … +212 °F)
-
EPDM (A+P 75.5/KW75F) -30 … +100 °C (-22 … +212 °F)
-
NBR (COG) -20 … +100 °C (-4 … +212 °F)
P roduct temperature front-flush threaded fitting G1 A according to EHEDG, threaded fitting
M 44 x 1.25 as well as hygienic fittings, depending on seal 15) 16)
-
FKM (VP2/A) -20 … +150 °C (-4 … +302 °F)
-
EPDM (A+P 75.5/KW75F) -30 … +150 °C (-22 … +302 °F)
-
NBR (COG) -20 … +150 °C (-4 … +302 °F)
V ibration resistance mechanical vibrations with 4 g and 5 … 100 Hz 17)
S hock resistance A cceleration 100 g/6 ms 18)
14) V ersion for oxygen applications up to 60 °C (140 °F).
15) N ot with hygienic fitting with compression nut F40 PN40/316L
16) V ersion for oxygen applications up to 60 °C (140 °F).
17) T ested according to the regulations of German Lloyd, GL directive 2.
18) T ested according to EN 60068-2-27.
VEGABAR 63 • 4 … 20 mA/HART 59
10 S upplement
32462
-
EN
-081209