TELEFUNKEN TLF FP 1000 - Handbuch (Seite 13)

BEFORE FIRST USE
- 12 -
ON Pulse OFF
READY WHEN LIT
carefully; they are very sharp.
* Wash all parts except the Base in hot, soapy water. Rinse them dry. These parts can also be placed in the dishwasher.
Be sure to read this Use & Care Book, paying special attention to the sections on “How to Use” and “Care and Cleaning”
to learn the correct methods for taking the unit apart and cleaning.
PARTS AND FEATURES
1. Spatula
2. Slice/Shred Disc
3. Thin Slice/Shred Disc
4. Disc Stem
5. Dough Blade
6. S -Blade
7. Small S-Blade
8. Small Feeding Channel
9. Feeding Channel
10. Bowl Lid
11. Small Bowl
12. Bowl
13. Driving Shaft
14. Base
15. Control Panel
CONTROL PANEL
1. Pulse
2. On
3. Off
OFF: When the indicator on “Off” glows, the unit can work.
ON: When the “On” button is pressed, the indicator will glow.
Pulse: Press “Pulse” button and held on, the light on “Pulse” will glow, and if release the button the light will go out.
USING YOUR FOOD PROCESSOR
Note: Do not attempt to chop ice in this food processor; it will damage container and dull the Chopping Blade. This
unit will not whip cream, beat egg whites to a desirable volume, grind coffee beams or spices with high oil content,
or slice or shred hard-cooked eggs, marshmallows, or soft cheeses.
Important: For your protection, this unit has an interlock system. The processor won’t operate unless the bowl is
properly locked onto base and cover is properly locked onto the bowl, be sure to attach the bowl to the base before
attaching the food chute Lid on the bowl Lid is also on the lock position. Do not attempt to operate the unit without
the bowl lid, bowl and food chute Lid being correctly in place. Be sure base is on a flat, dry and clean surface before
you begin processing.
HOW TO ASSEMBLE THE BOWL
Align the base and bowl as illustrated Fig. 1, then align the bowl handle with the
unlock
mark on the base, turn the
bowl counterclockwise until it click into base. Then the bowl handle will align with the mark
lock
on the base.
Note: There is only one position for the bowl to lock onto the base. The food processor will not operate unless the bowl
is securely
HOW TO LOCK THE COVER
Open the food chute lid (see “How to open food chute lid” on page 5). Place the cover onto the bowl, align the mark
on the cover and the mark
unlock
on the bowl, twist the cover counterclockwise towards LOCK until it click into