VEGA VEGAMET 381 Ex - Manual (Page 30)

30
8 Dismounting
VEGAMET 381 Ex • 4 … 20 mA signal conditioning instrument
30418-01-131025
Fehlercode Ursache Beseitigung
E017 Adjustment span
too small
Carry out a fresh adjustment and increase the distance between
min. and max. adjustment
E021 Scaling span too
small
Carry out a fresh scaling, increase the distance between min. and
max. scaling.
E110 Relay switching
points too close
together
Increase the difference between the two relay switching points
7.3 How to proceed in case of
repair
You can find a repair form as well as de-
tailed information on how to proceed under
www.vega.com/downloads and "Forms and
certificates".
By doing this you help us carry out the repair
quickly and without having to call back for nee-
ded information.
If a repair is necessary, please proceed as
follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-
proof
•
Attach the completed form and, if need
be, also a safety data sheet outside on the
packaging
•
Please contact the agency serving you to
get the address for the return shipment.
You can find the agency on our home page
www.vega.com.
8 Dismounting
8.1 Dismounting steps
Take note of chapters "Mounting" and "Connec-
ting to power supply" and carry out the listed
steps in reverse order.
8.2 Disposal
The instrument consists of materials which can
be recycled by specialised recycling companies.
We use recyclable materials and have designed
the parts to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective nati-
onal laws. Pass the instrument directly on to a
specialised recycling company and do not use
the municipal collecting points. These may be
used only for privately used products according
to the WEEE directive.
Correct disposal avoids negative effects on
humans and the environment and ensures
recycling of useful raw materials.
Materials: see chapter "Technical data"
If you have no way to dispose of the old instru-
ment properly, please contact us concerning
return and disposal.