VEGA VEGAFLEX 66 (-110…+400°C) Profibus PA - Manual (Page 37)

7 Setup with PACTware and other
adjustment programs
7.1 Connecting the PC
~
=
Power supply
VEGACONNECT 3
PACTware / TM
>PA<
2
3
1
Fig. 18: Connection of the PC directly to the sensor via I²C interface
1
RS232 connection
2 VEGAFLEX 66
3 I²C adapter cable for VEGACONNECT 3
Necessary components:
l
VEGAFLEX 66
l
PC with PACTware and suitable VEGA DTM
l
VEGACONNECT 3 with I²C adapter cable (article no.
2.27323)
l
Power supply unit
7.2 Parameter adjustment with PACTware
Further setup steps are described in the operating instructions
manual "DTM Collection/PACTware" attached to each CD and
which can also be downloaded from our homepage. A detailed
description is available in the online help of PACTware and the
VEGA DTMs.
Note:
Keep in mind that for setup of VEGAFLEX 66, DTM-Collection
in the actual version must be used.
Connection via I²C inter-
face
VEGAFLEX 66 • Profibus PA 37
7 Setup with PACTware and other adjustment programs
32764
-
EN
-080716