Document Outline

• Quick start
• 1 About this document
  • 1.1 Function
  • 1.2 Target group
  • 1.3 Symbolism used
• 2 For your safety
  • 2.1 Authorised personnel
  • 2.2 Appropriate use
  • 2.3 Warning about incorrect use
  • 2.4 General safety instructions
  • 2.5 CE conformity
  • 2.6 SIL qualification according to IEC 61508
  • 2.7 NAMUR recommendations
  • 2.8 Environmental instructions
• 3 Product description
  • 3.1 Configuration
  • 3.2 Principle of operation
  • 3.3 Packaging, transport and storage
  • 3.4 Accessories and replacement parts
• 4 Mounting
  • 4.1 General instructions
  • 4.2 Mounting instructions
• 5 Connecting to power supply
  • 5.1 Preparing the connection
  • 5.2 Connecting
  • 5.3 Wiring plan, single chamber housing
  • 5.4 Wiring plan, double chamber housing
  • 5.5 Wiring plan, Ex-d-ia double chamber housing
  • 5.6 Wiring plan - version IP 66/IP 68, 1 bar
  • 5.7 Supplementary electronics
  • 5.8 Switch-on phase
• 6 Functional safety (SIL)
  • 6.1 Objective
  • 6.2 SIL qualification
  • 6.3 Application area
  • 6.4 Safety concept of the parameterization
  • 6.5 Setup process
• 7 Set up with the display and adjustment module
  • 7.1 Insert display and adjustment module
  • 7.2 Adjustment system
  • 7.3 Parameter adjustment
  • 7.4 Saving the parameter adjustment data
• 8 Setup with PACTware
  • 8.1 Connect the PC
  • 8.2 Parameter adjustment with PACTware
  • 8.3 Saving the parameter adjustment data
• 9 Set up with other systems
  • 9.1 DD adjustment programs
  • 9.2 Field Communicator 375, 475
• 10 Diagnostics and service
  • 10.1 Maintenance
  • 10.2 Diagnosis memory
  • 10.3 Status messages
  • 10.4 Rectify faults
  • 10.5 Exchanging the electronics module
  • 10.6 Exchange or shorten cable/rod
  • 10.7 Software update
  • 10.8 How to proceed in case of repair
• 11 Dismounting
  • 11.1 Dismounting steps
  • 11.2 Disposal
• 12 Supplement
  • 12.1 Technical data
  • 12.2 Dimensions
  • 12.3 Industrial property rights
  • 12.4 Trademark