VEGA VEGAFLEX 82 Modbus and Levelmaster protocol - Manual (Page 14)

14
3 Product description
VEGAFLEX 82 • Modbus and Levelmaster protocol
41833-EN-130314
The electronics module Modbus is a replacement part for TDR sen-
sors of VEGAFLEX series 80.
You can find further information in the operating instructions manual
"Electronics module Modbus VEGAFLEX series 80".
The display and adjustment module can be optionally replaced by a
display and adjustment module with heating function.
You can hence use the display and adjustment module in an ambient
temperature range of -40 … 70 °C.
You can find further information in the operating instructions "Display
and adjustment module with heating" (Document-ID 31708).
If you are using an instrument with rod version, you can extend the
rod probe individually with curved segments and rod extensions of
different lengths.
All extensions used must not exceed a total length of 6 m (19.7 ft).
The extensions are available in the following lengths:
Rod: ø 16 mm (0.63 in)
•
Basic segments: 20 … 5900 mm (0.79 … 232 in)
•
Rod segments: 20 … 5900 mm (0.79 … 232 in)
•
Curved segments: 100 x 100 mm (3.94 … 3.94 in)
You can find further information in the operating instructions manual
"Rod extension VEGAFLEX series 80".
If you mount the VEGAFLEX 82 in a bypass tube or standpipe, you
have to avoid contact to the bypass tube by using a spacer at the
probe end.
You can find further information in the operating instructions manual
"Bypass tube VEGAPASS 81".
Electronics module,
Modbus
Display and adjustment
module with heating
Rod extension
Spacer