7 setup with pactware, 1 connect the pc, 7setup with pactware – VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) 4 … 20 mA_HART - two-wire, approval according to LPR radio standard User Manual
Page 50: 1 connect the pc 3 1 2
7
Setup with PACTware
7
.1 Connect the PC
3
1
2
Fig. 30: Connection of the PC directly to the sensor via the interface adapter
1
USB cable to the PC
2
Interface adapter VEGACONNECT 4
3
Sensor
Information:
The interface adapter VEGACONNECT 3 or additional previous
versions are not suitable for connection to the sensor.
1
2
4
3
OPEN
TWIST
USB
LO
CK
Fig. 31: Connecting the PC via HART to the signal cable
1
Sensor
2
HART resistance 250 Ω (optional depending on processing)
3
Connection cable with 2 mm pins and terminals
4
Processing system/PLC/Voltage supply
5
Interface adapter, for example VEGACONNECT 4
Via the interface adapter
directly on the sensor
Via the interface adapter
and HART
50
VEGAPULS
62 • 4 … 20 mA/HART - two-wire, approval according to LPR radio standard
7 Setup with PACTware
41718
-EN
-120301