VEGA VEGAFLEX 82 Profibus PA - Manual (Page 74)

74
11 Supplement
VEGAFLEX 82 • Profibus PA
44220-EN-130910
11 Supplement
11.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting 316L and PPS GF 40, Hastelloy C22 (2.4602) and PPS
GF 40
Ʋ Process seal on the instrument side
(cable/rod leadthrough)
FKM (SHS FPM 70C3 GLT), FFKM (Kalrez 6375),
EPDM (A+P 75.5/KW75F)
Ʋ Process seal On site (instruments with thread: Klingersil C-4400 is
attached)
Ʋ Inner conductor (up to the separation
cable/rod)
316L
Ʋ Rod: ø 16 mm (0.63 in) 316L or Hastelloy C22 (2.4602)
Ʋ Cable: ø 4 mm (0.157 in) 316 (1.4401)
Ʋ Cable: ø 6 mm (0.236 in) - PA coated C22.8 (verzinkt), PA-beschichtet
Ʋ Cable: ø 6 mm (0.236 in) 316 (1.4401)
Ʋ Cable: ø 11 mm (0.433 in) - PA coated C22.8 (verzinkt), PA-beschichtet
Ʋ Gravity weight (optionally available) 316L
Materials, non-wetted parts
Ʋ Plastic housing plastic PBT (Polyester)
Ʋ Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
Ʋ Stainless steel housing - precision
casting
316L
Ʋ Stainless steel housing, electropol-
ished
316L
Ʋ Second line of defence (optional) 1) Borosilicate glass GPC 540
Ʋ Seal between housing and housing
cover
NBR (stainless steel housing, precision casting), silicone
(aluminium/plastic housing; stainless steel housing,
electropolished)
Ʋ Inspection window in housing cover
(optional)
Polycarbonate (with Ex d version: glass)
Ʋ Ground terminal 316L
Ohmic contact Between ground terminal, process fitting and probe
Process fittings
Ʋ Pipe thread, cylindrical (ISO 228 T1) G¾, G1, G1½ according to DIN 3852-A
Ʋ American pipe thread, conical
(ASME B1.20.1)
¾ NPT, 1 NPT, 1½ NPT
Ʋ Flanges e.g. DIN from DN 25, ANSI from 1"
Weight
1) Only with Ex d version