Banks Power Interface- Banks iQ 1996 & Later Vehicles with OBDII Diagnostics User Manual

Page 15

Advertising
background image

97272 v.1.0

15

NOTE: Remember, you can upgrade your
Banks iQ as new software is developed
and learn more about other Banks iQ
applications anytime. Register at

www.bankspower.com/banksiq to

receive important e-mail alerts regarding

updates and upgrades for your Banks

iQ device. Or call us with questions at
1-800-GET-POWER.
Once the iQ is properly connected to
the vehicle (

sections 2 & 3

) it will

wake up and be ready for use when the
vehicle key is turned on. If you are using
the iQ outside of your vehicle, you may
either wake up or power on the iQ by
pressing the power button (see Figure

1). After initial start-up, Banks iQ will
either display the ‘Mode Select’ menu
or a previously selected mode. to return
to the ‘Mode Select’ menu, press the iQ
home icon in the lower left corner of the
screen. See Figure 7, 8 & 9. To navigate
through the menu press the left or the
right arrows. The Banks iQ will display
the options available for your vehicle.

After a selection has been made, the

Banks iQ will start in the selected Mode

Screen. To access other applications,

press the ‘Banks iQ Home’ icon at any

time in the lower left hand side to return

to the Mode Select Menu. See Figure 9.
Sleep Mode
When Banks iQ is connected to your

vehicle it will go into ‘Sleep Mode’

whenever the vehicle is turned off.

For some vehicle models, If in the

Navigation Mode, the iQ may require to

be put into sleep mode manually.

There is no need to exit the Banks iQ

application or to turn the iQ off. Banks

iQ will automatically ‘Wake Up’ when

the vehicle ignition is turned on or the

‘Power’ button is pressed.
When Banks iQ is disconnected from

the vehicle or power supply, the iQ will

go into ‘Sleep Mode’ if no activity is

detected within an allotted time. The

time for the iQ to go into ‘Sleep Mode’

can be changed by pressing on the

‘Battery Management’ button in the

‘Adjustments’ menu. Refer to

Section

15

to change settings.

Section 4

SOFTWARE InTRODUCTIOn

Figure 6 Start up

Advertising