Banks Power Interface- Banks iQ 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 28)

28
97272 v.1.0
Section 12
GPS DATA MODE
GPS Data
The GPS Data Mode provides the current
status of the GPS in the Banks iQ. In
the Mode selection menu press on the
‘GPS Data’ button. The Data displays
the accuracy of the system depending
on signal, the GPS Time, the Speed the
GPS is traveling, Latitude, Longitude, and
the GPS Elevation. See Figure 25. After
reviewing the data, press the ‘iQ’ icon to
return to the Mode select menu.
-END, SECTION 12-
Section 11
COMPASS MODE
Compass
Press on the ‘Compass’ button in the
‘Mode Select’ menu. The Compass
screen will display four (4) changeable
gauges and a compass. See Figure 24.
Refer to Selection 16 to change the
gauges displayed from a list of available
parameters.
The Compass can be adjusted to have
the vehicle pointer in the center spin
around the compass settings or have
the compass spin around the vehicle
pointer to show the current heading. To
adjust the compass method of direction
pointing, press on the ‘Wrench’ icon to
go to the ‘Options’ menu. Press on the
‘Direction’ tab in the ‘Options’ menu. In
the Direction menu press ‘North up’ to
have the vehicle pointer rotate around
the compass or press ‘Direction up’
to have the compass rotate around
the vehicle pointer. After setting the
compass, press the iQ icon to return to
the ‘Mode Select’ menu screen.
-END, SECTION 11-
Figure 24