Banks Power Interface- Banks iQ 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 32)

32
97272 v.1.0
3.
Maintain a steady speed. Any speed is
acceptable. Cruise control maybe used.
4.
While maintaining a steady speed,
press ‘Calibrate’. During the calibration
process. The GPS speed and the vehicle
speed will be displayed. When the on-
screen progress bar disappears from
view, Speed Calibration is complete. See
Figure 30.
5.
The calibrated speed can be adjusted
manual. Press the plus (+) or minus (-)
symbol to increase or decrease the
speed calibration.
6.
Use the ‘On’ and ‘Off’ buttons to
display the corrected speed in the
various modes on your Banks iQ.
7.
Press the ‘Banks iQ’ icon on the lower
left hand corner to return to the current
mode screen. Press the ‘Return‘ icon to
go back to the ‘Adjustments’ menu.
Figure 29
Figure 30