Banks Power Interface- Banks iQ 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 35)

97272 v.1.0
35
To update Banks iQ Software
1.
For Windows XP users, make sure
that Microsoft ActiveSync is installed
on your computer and that you have
an active internet connection.
For Windows 7 and Vista users, make
sure that Microsoft Mobile Device is
installed on your computer.
NOTE: If you do not have Microsoft
ActiveSync or Mobile Device visit
www.microsoft.com/windowsmobile
or visit Banks website for direct links
and detail update instruction at
www.bankspower.com/iqupdate
2.
Install the Banks iQ Update Utility
on your computer by visiting www.
BanksPower.com/Downloads.
3.
Turn the Banks iQ on and allow it
to complete its booting process (about
a minute). In the ‘Mode Select’ menu
press on the ‘Productivity’ Mode. Then
press on ‘Desktop’ tab to open the
Windows desktop. For instruction on
how to access the Desktop refer to
Section 9 . Then plug the Banks iQ into
your PC using the supplied USB cable.
CAUTIOn: The iQ must be in the
the Windows desktop before
connecting the iQ to a PC. The iQ
will either ignore the connection
or register an error if the iQ is not
in the ‘Desktop’ mode.
4.
Start the Banks iQ Update Utility
and follow the on-screen directions on
your PC to update your Bank iQ with
the latest software updates.
For more detail instruction to
update your Banks iQ please go to
www.bankspower.com/iqupdate.
-END, SECTION 15-