Rainbow Electronics AT83C26 - Manual (Page 34)

34
7511B–SCR–10/05
AT83C26
10. Write SC5 interface: SC5_CFG0, SC5_CFG2
Configuration of SIM/SAM interface 5.
11. Write DCDCB config: DCDCB, LDO
Configuration of DCDCB converter.
12. Write SLEW_CTRL config: SLEW_CTRL_1, SLEW_CTRL_2, SLEW_CTRL_3
Configuration of slew rate for CCLKn and CIOn (n = 1, 2, 3, 4, 5).
Table 6. Write Commands Description
Address
Byte
(See Table 2) Command Byte Data Byte 1 Data Byte 2 Data Byte 3 Data Byte 4
[0] [1] [2] [3] [4]
1. General Call Reset 0000 0000 0000 0110
2. Reset 0100 XX10 1111 1111
3. Write config 0100 XX10 (10 + SC1_CFG0 6 bits) SC1_CFG1 SC1_CFG2 SC1_CFG3 SC1_CFG4
4. Write Timer 0100 XX10 1111 1100 TIMER_MSB TIMER_LSB
5. Write Interface 0100 XX10 (0+SC1_INTERFACE 7 bits)
6.Write Config SC on DCDCB 0100 XX10 1111 1000 IO_SELECT INTERFACE_B ITDIS
7. Write SC2 interface 0100 XX10 1111 1001 SC2_CFG0 SC2_CFG1 SC2_CFG2
8. Write SC3 interface 0100 XX10 1111 1010 SC3_CFG0 SC3_CFG2
9. Write SC4 interface 0100 XX10 1111 1011 SC4_CFG0 SC4_CFG2
10. Write SC5 interface 0100 XX10 1111 1101 SC5_CFG0 SC5_CFG2
11. Write DCDCB config 0100 XX10 1111 1110 DCDCB LDO
12. Write SLEW_CTRL config 0100 XX10 1111 0111 SLEW_CTRL_1 SLEW_CTRL_2 SLEW_CTRL_3