Apple Nike + iPod Sensor - Manual (Page 29)

29
Linking to Another Sensor
Once your device links to a specific sensor, it’s set to
link with that sensor only. If you use a different sensor,
you must set the device to link to the other sensor.
You may want to do this, for example, if there’s more
than one person in your family with a sensor and Nike+
ready shoes.
To link to another sensor:
1 iPod nano: Connect the receiver to iPod nano.
2 Put on the shoes with the new sensor, and make sure
there’s no other Nike + iPod Sensor nearby.
Walk around to activate the sensor so that your receiver
can detect it.
3 Link the sensor to your device:
 iPod nano (5th generation or earlier): Choose
Nike + iPod > Settings > Sensor > Link, then follow
the onscreen instructions. A message indicates iPod
is now linked to the new sensor.
 iPod nano (6th generation): Choose Settings >
Fitness > Nike + iPod Sport Kit > Sensor, tap Link,
then tap the screen while walking or running to
relink the device to the different sensor.
 iPhone and iPod touch: Choose Settings >
Nike + iPod > Sensor, tap Link New, then follow the
onscreen instructions.
Note: If you link to a previously linked sensor,
Nike + iPod detects your calibration settings. You don’t
need to recalibrate.