Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 10)

English
SPH10S
9
If you have a MP3 stereo music phone such as a
smartphone, sometimes you may need to selectively
use the SPH10S for A2DP stereo music only or for
mobile phone handsfree only. This instruction is for
advanced users who want to pair the SPH10S to their
smart phones only with one selective profile: A2DP
stereo for music or HFP for phone call.
If you have previously paired a mobile phone to the
SPH10S, you must clear the previous paring list on
both devices; the mobile phone and SPH10S. To clear
the pairing list on SPH10S, please do a factory reset
or follow the pairing list clearing procedure described
in this manual. To clear the pairing list on the mobile
phone, please refer to the mobile phone manual. For
most smart phones, delete the Sena SPH10S from the
list of Bluetooth devices in setting menu.
7.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps.
7. PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
2. Within 2 seconds, tap the Jog Dial again, then the
LED turns to red flashing and the beeps turn to
double mid-tone beeps. You will hear a voice prompt
saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10S in the list of devices detected
on your phone.
4. Enter 0000 for the PIN. Some smartphones may not
ask for PIN.
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn to
multiple mid-tone beeps. You will hear a voice prompt
saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10S in the list of devices detected
on your phone.
4. Enter 0000 for the PIN. Some smart phones may not
ask for PIN.