Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 12)

English
SPH10S
11
5. The intercom pairing queue is ‘Last-Come, First-
Served’. If a headset has multiple paired headsets
for intercom conversations, the last paired headset is
set as first intercom friend. The previous intercom
friend becomes second intercom friend, and third
intercom friend.
8.2 Pairing with Other Sena Headset Models
for Intercom Conversation
The SPH10S can be paired with all other Sena headset
models such as the SMH10 and the SPH10 for intercom
conversation. Please follow the same procedure as
above to pair with these headset models.
Note:
For example, after the pairing procedures listed above,
headset D is the first intercom friend of headset A.
Headset C is the second intercom friend of headset A,
and headset B is the third intercom friend of headset A.
Note:
The SMH5 cannot participate in three-way or four-way
conference intercom with the SPH10S or the SPH10.
The SMH5 has a limited capability of having two-way
intercom with each other or with other Sena headsets
such as the SPH10S and the SPH10.
You can set the configuration of the SPH10S by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying “Configuration
menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature
by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10S will exit the configuration and goes back to
stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt,
“Exit configuration”, and tap the Phone Button.
9. SPH10S CONFIGURATION SETTING