Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 11)

SPH10S
10
8.1 Pairing with Other SPH10S Headsets for
Intercom Conversation
The SPH10S can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10S headsets (A and B) that you
would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
to flash rapidly. You will hear a voice prompt saying
“Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets
A or B (It doesn’t matter that you choose A or B.) and
wait until the LEDs of both headsets turn to blue and
intercom connection is automatically established. The
two SPH10S headsets A and B are paired with each
other for intercom conversation. If the pairing process
is not completed within one minute, the SPH10S will
return to stand-by mode.
8. INTERCOM PAIRING
Pairing A & B
Pairing A & C Pairing A & D
A
B D
C
A
B D
C
B D
C
A
4. You can make other pairings between the headset
A and C, and between the headset A and D by
following the same procedure as above.