Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 15)

SPH10S
14
Rotate Jog Dial Tap Phone Button Tap Jog Dial
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
PLC Setting Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Configuration Menu & Button Operations
Voice Prompt “Exit configuration”
Factory Default N/A
Enable Tap the Phone Button
Taping the Jog Dial is not available for this setting.
9.6 Exit Voice Configuration Menu
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, “Exit configuration”, and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
The SPH10S operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a
higher priority function. For example, stereo music is
interrupted by intercom call, and intercom conversation
is interrupted by incoming mobile phone call.
10. FUNCTION PRIORITY