Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 9)

SPH10S
8
detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phone may not
ask for the PIN.
4. The mobile phone confirms that pairing has completed
and the SPH10S is ready to use. You will hear a voice
prompt from the SPH10S saying “Your headset is
paired”.
5. If the pairing process is not completed within three
minutes, the SPH10S will return to stand-by mode.
6.2 Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the
mobile phone such as smartphones, you don’t need
to pair the SPH10S with it separately. When the
SPH10S is paired with the mobile phone, it is also
paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device,
follow the paring procedure separately. The procedure
is the same as the procedure in “6.1 Mobile Phone
Pairing”.
Note:
1. If Bluetooth connection between the headset and a
mobile phone is disconnected, tap the Phone Button
to recover the Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a
media player is disconnected, press the Jog Dial for 1
second to recover the Bluetooth connection and play.