Sena Bluetooth SPH10S v4.1 User's Guide - Manual (Page 22)

English
SPH10S
21
15. FOUR-WAY CONFERENCE INTERCOM
15.1 Start Four-way Intercom
You can have four-way conference intercom with three
other SPH10S users by adding one more intercom
participant to the three-way intercom. While you are
having three-way intercom as above in section 14.1, a
new participant (D), who is an intercom friend of your
intercom friend (C), may join the conference intercom
by making an intercom call to your intercom friend
(C). Please note that in this case, the new participant
(D) is an intercom friend of (C), not of you (A).
15.2 End Four-way Intercom
As same in the case of three-way intercom, you
can completely get out of the four-way conference
First Friend
(B)
Second Friend
(C)
You
(A)
New Participant
(D)
= Intercom Friend of (C)
intercom or just disconnect a single intercom
connection.
1. Press the Jog Dial for 1 second until you hear a
beep to terminate four-way conference intercom.
It terminates the intercom connections between
you (A), and your intercom friends (B) and (C).
2. Tap or double tap the Jog Dial to disconnect
the intercom connection with one of the two
intercom friends accordingly. However, when
you disconnect the second friend (C) by double
tapping the Jog Dial, you will be disconnected
with the third participant (D) as well. This is
because the third participant (D) is connected
with you via the second friend (C).
End Four-way Intercom
Jog Dial Operation Result
Press for 1” Disconnect (B), (C) & (D)
Single tap Disconnect (B)
Double tap Disconnect (C) & (D)